SoX(7)                         Sound eXchange_ng                        SoX(7)

NAME
       SoX - Sound eXchange_ng, another Swiss Army knife of audio manipulation

DESCRIPTION
       This  manual  describes  SoX  supported  file  formats and audio device
       types; the SoX manual set starts with sox_ng(1).

       Format types that can SoX can determine by  a  filename  extension  are
       listed  with  their names preceded by a dot.  Format types that are op-
       tionally built into SoX are marked `(optional)'.

       Format types that can be handled by an external library via an optional
       pseudo file type (currently sndfile) are marked  e.g.  `(also  with  -t
       sndfile)'.   This  might be useful if you have a file that doesn't work
       with SoX's default format readers and writers, and there's an  external
       reader or writer for that format.

       To  see  if  SoX  has  support  for an optional format or device, enter
       sox_ng -h and look for its name under the list: `AUDIO FILE FORMATS' or
       `AUDIO DEVICE DRIVERS'.

   SOX_NG FORMATS & DEVICE DRIVERS
       .raw (also with -t sndfile), .f32, .f64, .s8, .s16, .s24, .s32,
       .u8, .u16, .u24, .u32, .ul, .al, .lu, .la
              Raw (headerless) audio files.  For raw, the sample rate and  the
              data  encoding  must be given using command-line format options;
              for the other listed types, the sample  rate  defaults  to  8kHz
              (but may be overridden), and the data encoding is defined by the
              given suffix.  Thus f32 and f64 indicate files encoded as 32 and
              64-bit (IEEE single and double precision) floating point PCM re-
              spectively; s8, s16, s24, and s32 indicate 8, 16, 24, and 32-bit
              signed  integer PCM respectively; u8, u16, u24, and u32 indicate
              8, 16, 24, and 32-bit unsigned integer PCM respectively; ul  in-
              dicates `<mu>-law' (8-bit), al indicates `A-law' (8-bit), and lu
              and  la  are  inverse bit order `<mu>-law' and inverse bit order
              `A-law' respectively.  For all raw formats, the number of  chan-
              nels defaults to 1 (but may be overridden).

              Headerless  audio  files on a SPARC computer are likely to be of
              format ul;  on a Mac, they're likely to be u8 but with a  sample
              rate of 11025 or 22050 Hz.

              See  .ima  and  .vox for raw ADPCM formats, and .cdda for raw CD
              digital audio.

       .f4, .f8, .s1, .s2, .s3, .s4,
       .u1, .u2, .u3, .u4, .sb, .sw, .sl, .ub, .uw
              Deprecated aliases for f32, f64, s8, s16, s24, s32,
              u8, u16, u24, u32, s8, s16, s32, u8, and u16 respectively.

       .8svx (also with -t sndfile)
              Amiga 8SVX musical instrument description format.

       .aiff, .aif (also with -t sndfile)
              AIFF files as used on old Apple Macs, Apple  IIc/IIgs  and  SGI.
              SoX's  AIFF  support  does not include multiple audio chunks, or
              the 8SVX musical instrument description format.  AIFF files  are
              multimedia  archives  and  can  have  multiple audio and picture
              chunks - you may need a separate archiver to work with them.  On
              MacOS X, AIFF has been superceded by CAF.

       .aiffc, .aifc (also with -t sndfile)
              AIFF-C is a format based on AIFF that was created to allow  han-
              dling compressed audio.  It can also handle little endian uncom-
              pressed  linear data that is often referred to as sowt encoding.
              This encoding has also become the  defacto  format  produced  by
              modern  Macs  as  well  as iTunes on any platform.  AIFF-C files
              produced by other applications typically have the file extension
              .aif and require looking at its header to detect the  true  for-
              mat.  The sowt encoding is the only encoding that SoX can handle
              with this format.

              AIFF-C  is  defined in DAVIC 1.4 Part 9 Annex B.  This format is
              referred from ARIB STD-B24, which is specified for Japanese data
              broadcasting.  Any private chunks are not supported.

       alsa (optional)
              Advanced Linux Sound Architecture device driver;  supports  both
              playing  and  recording audio.  ALSA is only used in Linux-based
              operating systems, though these often support OSS (see below) as
              well.  Examples:

                   sox_ng infile -t alsa
                   sox_ng infile -t alsa default
                   sox_ng infile -t alsa plughw:0,0
                   sox_ng -b 16 -t alsa hw:1 outfile

              See also play_ng(1), rec_ng(1), and sox_ng(1) -d.

       .amb   Ambisonic B-Format: a specialisation of .wav with between 3  and
              16  channels  of  audio  for use with an Ambisonic decoder.  See
              http://www.ambisonia.com/Members/mleese/file-format-for-b-format
              for details.  It is up to the user to get the channels  together
              in the right order and at the correct amplitude.

       .amr-nb (optional)
              Adaptive  Multi  Rate - Narrow Band speech codec; a lossy format
              used in 3rd generation mobile telephony and defined in  3GPP  TS
              26.071 et al.

              AMR-NB audio has a fixed sampling rate of 8 kHz and supports en-
              coding  to  the  following  bit-rates (as selected by the -C op-
              tion): 0 = 4.75 kbit/s, 1 = 5.15 kbit/s, 2 = 5.9 kbit/s, 3 = 6.7
              kbit/s, 4 = 7.4 kbit/s 5 = 7.95 kbit/s, 6 =  10.2  kbit/s,  7  =
              12.2 kbit/s.

       .amr-wb (optional)
              Adaptive  Multi  Rate  -  Wide Band speech codec; a lossy format
              used in 3rd generation mobile telephony and defined in  3GPP  TS
              26.171 et al.

              AMR-WB  audio  has  a fixed sampling rate of 16 kHz and supports
              encoding to the following bit-rates (as selected by the  -C  op-
              tion):  0  =  6.6 kbit/s, 1 = 8.85 kbit/s, 2 = 12.65 kbit/s, 3 =
              14.25 kbit/s, 4 = 15.85 kbit/s 5  =  18.25  kbit/s,  6  =  19.85
              kbit/s, 7 = 23.05 kbit/s, 8 = 23.85 kbit/s.

       ao (optional)
              Xiph.org's  Audio  Output  device driver; works only for playing
              audio.  It supports a wide range of devices and sound systems  -
              see  its  documentation  for the full range.  For the most part,
              SoX's use of libao cannot be configured directly; instead, libao
              configuration files must be used.

              The filename specified is used to determine which  libao  plugin
              to use.  Normally, you should specify `default' as the filename.
              If  that  doesn't give the desired behavior then you can specify
              the short name for a given plugin (such as pulse for pulse audio
              plugin).  Examples:

                   sox_ng infile -t ao
                   sox_ng infile -t ao default
                   sox_ng infile -t ao pulse

              See also play_ng(1) and sox_ng(1) -d.

       .au, .snd (also with -t sndfile)
              Sun Microsystems AU files.  There are many types of AU file; DEC
              has invented its own with a different magic number and byte  or-
              der.   To  write  a  DEC file, use the -L option with the output
              file options.

              Some .au files are known to have invalid AU headers;  these  are
              probably  original  Sun  <mu>-law 8000 Hz files and can be dealt
              with using the .ul format (see below).

              It is possible to override AU file header information  with  the
              -r  and  -c  options,  in which case SoX will issue a warning to
              that effect.

       .avr   Audio Visual Research format; used by  a  number  of  commercial
              packages on the Mac.

       .caf (optional)
              Apple's Core Audio File format.

       .cdda, .cdr
              `Red Book' Compact Disc Digital Audio (raw audio).  CDDA has two
              audio  channels  formatted  as  16-bit  signed integers (big en-
              dian)at a sample rate of 44.1 kHz.  The number of (stereo)  sam-
              ples in each CDDA track is always a multiple of 588.

       coreaudio (optional)
              Mac  OSX  CoreAudio  device  driver:  supports  both playing and
              recording audio.  If a filename is not specific or if  the  name
              is  "default"  then  the  default audio device is selected.  Any
              other name will be used to select a specific device.  The  valid
              names can be seen in the System Preferences->Sound menu and then
              under the Output and Input tabs.

              Examples:

                   sox_ng infile -t coreaudio
                   sox_ng infile -t coreaudio default
                   sox_ng infile -t coreaudio "Internal Speakers"

              See also play_ng(1), rec_ng(1), and sox_ng(1) -d.

       .cvsd, .cvs
              Continuously Variable Slope Delta modulation.  A headerless for-
              mat used to compress speech audio for applications such as voice
              mail.  This format is sometimes used with bit-reversed samples -
              the -X format option can be used to set the bit-order.

       .cvu   Continuously Variable Slope Delta modulation (unfiltered).  This
              is an alternative handler for CVSD that is unfiltered but can be
              used with any bit-rate.  E.g.

                   sox_ng infile outfile.cvu rate 28k
                   play -r 28k outfile.cvu sinc -3.4k


       .dat   Text  Data  files.  These files contain a textual representation
              of the sample data.  There is one line  at  the  beginning  that
              contains  the sample rate, and one line that contains the number
              of channels.  Subsequent lines contain two or more numeric  data
              intems: the time since the beginning of the first sample and the
              sample value for each channel.

              Values  are  normalized so the maximum and minimum are 1 and -1.
              This file format can be used to create data files  for  external
              programs  such as FFT analyzers or graph routines.  SoX can also
              convert a file in this format back into one of  the  other  for-
              mats.

              Example containing only 2 stereo samples of silence:


                  ; Sample Rate 8012
                  ; Channels 2
                              0    0    0
                  0.00012481278  0    0


       .dvms, .vms
              Used  in  Germany  to  compress  speech audio for voice mail.  A
              self-describing variant of cvsd.

       .fap (optional)
              See .paf.

       .flac (optional; also with -t sndfile or -t ffmpeg)
              Xiph.org's Free Lossless Audio Codec compressed audio.  FLAC  is
              an  open,  patent-free codec designed for compressing music.  It
              is similar to MP3 and Ogg Vorbis but lossless, so the  audio  is
              compressed without any loss in quality.

              SoX  can  read  native FLAC files (.flac) but not Ogg FLAC files
              (.ogg).  [But see .ogg below for information relating to support
              for Ogg Vorbis files.]

              SoX can write native FLAC files according to a given or  default
              compression level.  8 is the default compression level and gives
              the  best  (but  slowest)  compression;  0  gives the least (but
              fastest) compression.  The compression level is  selected  using
              the -C option [see sox_ng(1)] with a whole number from 0 to 8.

       .fssd  An alias for the .u8 format.

       .gsrt  Grandstream  ring-tone  files.  Whilst this file format can con-
              tain A-Law, <mu>-law, GSM, G.722, G.723, G.726, G.728,  or  iLBC
              encoded  audio,  SoX supports reading and writing only A-Law and
              <mu>-law.  E.g.

                 sox_ng music.wav -t gsrt ring.bin
                 play ring.bin


       .gsm (optional; also with -t sndfile)
              GSM 06.10 Lossy Speech Compression.  A  lossy  format  for  com-
              pressing  speech which is used in the Global Standard for Mobile
              telecommunications (GSM).  It's good for its purpose,  shrinking
              audio  data  size,  but  it  will introduce lots of noise when a
              given audio signal is encoded and decoded multiple times.   This
              format  is  used  by some voice mail applications.  It is rather
              CPU intensive.

       .hcom  Macintosh HCOM files.  These are Mac  FSSD  files  with  Huffman
              compression.

       .htk (also with -t sndfile)
              Single  channel  16-bit  PCM  format  used by HTK, a toolkit for
              building Hidden Markov Model speech processing tools.

       .ircam (also with -t sndfile)
              Another name for .sf.

       .ima (also with -t sndfile)
              A headerless file of IMA ADPCM  audio  data.  IMA  ADPCM  claims
              16-bit  precision packed into only 4 bits, but in fact sounds no
              better than .vox.

       .lpc, .lpc10
              LPC-10 is a compression  scheme  for  speech  developed  in  the
              United  States.  See  http://www.arl.wustl.edu/~jaf/lpc/ for de-
              tails. There is no associated file format, so SoX's  implementa-
              tion is headerless.

       .mat, .mat4, .mat5 (optional)
              Matlab 4.2/5.0 (respectively GNU Octave 2.0/2.1) format (.mat is
              the same as .mat4).

       .m3u   A  playlist  format;  contains  a  list of audio files.  SoX can
              read, but not write this file format.  See [1]  for  details  of
              this format.

       .maud  An  IFF-conforming  audio file type registered by MS MacroSystem
              Computer GmbH and published along with the `Toccata' sound  card
              on  the  Amiga  allows  8bit  linear,  16bit  linear,  A-Law and
              <mu>-law in mono and stereo.

       .mp3, .mp2 (optional read, optional write)
              MP3 compressed audio; MP3 (MPEG  Layer  3)  is  a  part  of  the
              patent-encumbered  MPEG  standards  for audio and video compres-
              sion.  It is a lossy compression format that achieves good  com-
              pression rates with little quality loss.

              Because MP3 is patented, SoX cannot be distributed with MP3 sup-
              port  without incurring the patent holder's fees.  Users who re-
              quire SoX with MP3 support must currently compile and build  SoX
              with  the  MP3  libraries  (LAME & MAD) from source code, or, in
              some cases, obtain pre-built dynamically loadable libraries.

              libmad, which SoX uses to decode .mp2 files, does  not  work  on
              files  with  a  bit-rate higher than 192K and decoding them with
              -t sndfile is broken but you can read them with -t ffmpeg.

              When reading MP3 files, up to 28 bits of precision is stored al-
              though only 16 bits is reported to user.  This is to  allow  de-
              fault behavior of writing 16 bit output files.  A user can spec-
              ify  a  higher  precision for the output file to prevent lossing
              this extra information.  MP3 output files will use up to 24 bits
              of precision while encoding.

              MP3 compression parameters can be selected using SoX's -C option
              as follows (note that the current syntax is subject to change):

              The primary parameter to the LAME encoder is the  bit  rate.  If
              the  value  of the -C value is a positive integer, it's taken as
              the bitrate in kbps (e.g. if you specify 128, it uses 128 kbps).

              The second most important parameter is probably  "quality"  (re-
              ally  performance),  which  allows  balancing encoding speed vs.
              quality.  In LAME, 0 specifies highest quality but is very slow,
              while 9 selects poor quality, but is fast. (5 is the default and
              2 is recommended as a good trade-off for high quality encodes.)

              Because the -C value is a float, the fractional part is used  to
              select  quality.  128.2 selects 128 kbps encoding with a quality
              of 2. There is one problem with this approach. We  need  128  to
              specify  128  kbps encoding with default quality, so 0 means use
              default. Instead of 0 you have to use .01 (or  .99)  to  specify
              the highest quality (128.01 or 128.99).

              LAME  uses  bitrate  to  specify  a constant bitrate, but higher
              quality can be achieved using Variable Bit Rate (VBR). VBR qual-
              ity (really size) is selected using a number from 0 to 9. Use  a
              value  of  0  for  high quality, larger files, and 9 for smaller
              files of lower quality. 4 is the default.

              In order to squeeze the selection of VBR into the the  -C  value
              float  we  use negative numbers to select VRR. -4.2 would select
              default VBR encoding (size) with high quality (speed). One  spe-
              cial  case is 0, which is a valid VBR encoding parameter but not
              a valid bitrate.  Compression value of 0 is always treated as  a
              high  quality  vbr, as a result both -0.2 and 0.2 are treated as
              highest quality VBR (size) and high quality (speed).

              See also Ogg Vorbis for a similar format.

       .nist (also with -t sndfile)
              See .sph.

       .ogg, .vorbis (optional)
              Xiph.org's Ogg Vorbis compressed  audio;  an  open,  patent-free
              CODEC  designed  for  music  and streaming audio.  It is a lossy
              compression format (similar to MP3, VQF  &  AAC)  that  achieves
              good compression rates with a minimum amount of quality loss.

              SoX  can decode all types of Ogg Vorbis files, and can encode at
              different compression levels/qualities given as a number from -1
              (highest compression/lowest quality) to 10 (lowest  compression,
              highest  quality).   By  default the encoding quality level is 3
              (which gives an encoded rate of approx. 112kbps), but  this  can
              be changed using the -C option (see above) with a number from -1
              to  10; fractional numbers (e.g.  3.6) are also allowed.  Decod-
              ing is somewhat CPU intensive and encoding is  very  CPU  inten-
              sive.

              See also .mp3 for a similar format.

       .opus (optional)
              Xiph.org's  Opus  compressed  audio; an open, lossy, low-latency
              codec offering a wide range of compression rates.  It  uses  the
              Ogg container.

              SoX can only read Opus files, not write them.

       oss (optional)
              Open  Sound System /dev/dsp device driver; supports both playing
              and recording audio.  OSS support is available in Unix-like  op-
              erating  systems, sometimes together with alternative sound sys-
              tems (such as ALSA).  Examples:

                   sox_ng infile -t oss
                   sox_ng infile -t oss /dev/dsp
                   sox_ng -b 16 -t oss /dev/dsp outfile

              See also play_ng(1), rec_ng(1), and sox_ng(1) -d.

       .paf, .fap (optional)
              Ensoniq PARIS file format (big and little-endian respectively).

       .pls   A playlist format; contains a list  of  audio  files.   SoX  can
              read,  but  not  write this file format.  See [2] for details of
              this format.

              Note: SoX support for SHOUTcast PLS relies  on  wget(1)  and  is
              only  partially  supported:  it's necessary to specify the audio
              type manually, e.g.

                   play -t mp3 "http://a.server/pls?rn=265&file=filename.pls"

              and SoX does not know about alternative  servers  -  hit  Ctrl-C
              twice in quick succession to quit.

       .prc   Psion  Record. Used in Psion EPOC PDAs (Series 5, Revo and simi-
              lar) for System alarms  and  recordings  made  by  the  built-in
              Record  application.  When writing, SoX defaults to A-law, which
              is recommended; if you must use ADPCM, then use the -e ima-adpcm
              switch. The sound quality is poor because Psion Record seems  to
              insist  on  frames  of  800  samples or fewer, so that the ADPCM
              CODEC has to be reset at every  800  frames,  which  causes  the
              sound to glitch every tenth of a second.

       pulseaudio (optional)
              PulseAudio driver; supports both playing and recording of audio.
              PulseAudio  is  a  cross  platform networked sound server.  If a
              file name is specified with this driver, it is  ignored.   Exam-
              ples:

                   sox_ng infile -t pulseaudio
                   sox_ng infile -t pulseaudio default

              See also play_ng(1), rec_ng(1), and sox_ng(1) -d.

       .pvf (optional)
              Portable Voice Format.

       .sd2 (optional)
              Sound Designer 2 format.

       .sds (optional)
              MIDI Sample Dump Standard.

       .sf (also with -t sndfile)
              IRCAM   SDIF  (Institut  de  Recherche  et  Coordination  Acous-
              tique/Musique Sound Description  Interchange  Format).  Used  by
              academic  music  software  such  as  the CSound package, and the
              MixView sound sample editor.

       .sln   Asterisk PBX `signed linear' 8khz, 16-bit signed  integer,  lit-
              tle-endian raw format.

       .sph, .nist (also with -t sndfile)
              SPHERE  (SPeech  HEader  Resources)  is a file format defined by
              NIST (National Institute of Standards  and  Technology)  and  is
              used with speech audio.  SoX can read these files when they con-
              tain  <mu>-law and PCM data.  It will ignore any header informa-
              tion that says the data is compressed using shorten  compression
              and  will  treat  the data as either <mu>-law or PCM.  This will
              allow SoX and the command line shorten program  to  be  run  to-
              gether using pipes to encompasses the data and then pass the re-
              sult to SoX for processing.

       .smp   Turtle Beach SampleVision files.  SMP files are for use with the
              PC-DOS  package  SampleVision  by  Turtle Beach Softworks.  This
              package is for communication to several MIDI samplers.  All sam-
              ple rates are supported by the package,  although  not  all  are
              supported by the samplers themselves.  Currently loop points are
              ignored.

       .snd   See .au, .sndr and .sndt.

       sndfile (optional)
              This  is  a  pseudo-type  that forces libsndfile to be used. For
              writing files, the actual file type is then taken from the  out-
              put file name; for reading them, it is deduced from the file.

       sndio (optional)
              OpenBSD audio device driver; supports both playing and recording
              audio.

                   sox_ng infile -t sndio

              See also play_ng(1), rec_ng(1), and sox_ng(1) -d.

       .sndr  Sounder  files.   An  MS-DOS/Windows format from the early '90s.
              Sounder files usually have the extension `.SND'.

       .sndt  SoundTool files.  An MS-DOS/Windows format from the early  '90s.
              SoundTool files usually have the extension `.SND'.

       .sou   An alias for the .u8 raw format.

       .sox   SoX's  native  uncompressed PCM format, intended for storing (or
              piping) audio at intermediate processing  points  (i.e.  between
              SoX  invocations).   It has much in common with the popular WAV,
              AIFF, and AU uncompressed PCM formats,  but  has  the  following
              specific  characteristics:  the PCM samples are always stored as
              32 bit signed integers, the samples are stored (by  default)  as
              `native  endian',  and  the  number  of  samples  in the file is
              recorded as a 64-bit integer.  Comments are also supported.

              See `Special Filenames' in sox_ng(1) for examples of  using  the
              .sox format with `pipes'.

       sunau (optional)
              Sun  /dev/audio device driver; supports both playing and record-
              ing audio.  For example:

                   sox_ng infile -t sunau /dev/audio

              or

                   sox_ng infile -t sunau -e mu-law -c 1 /dev/audio

              for older sun equipment.

              See also play_ng(1), rec_ng(1), and sox_ng(1) -d.

       .txw   Yamaha TX-16W sampler.  A file format  from  a  Yamaha  sampling
              keyboard which wrote IBM-PC format 3.5" floppies.  Handles read-
              ing  of files which do not have the sample rate field set to one
              of the expected by looking  at  some  other  bytes  in  the  at-
              tack/loop  length fields, and defaulting to 33 kHz if the sample
              rate is still unknown.

       .vms   See .dvms.

       .voc (also with -t sndfile)
              Sound Blaster VOC files.  VOC files are multi-part  and  contain
              silence parts, looping, and different sample rates for different
              chunks.   On  input, the silence parts are filled out, loops are
              rejected, and sample data with a new sample  rate  is  rejected.
              Silence with a different sample rate is generated appropriately.
              On  output,  silence  is not detected, nor are impossible sample
              rates.  SoX supports reading (but not writing)  VOC  files  with
              multiple  blocks,  and  files  containing  <mu>-law,  A-law, and
              2/3/4-bit ADPCM samples.

       .vorbis
              See .ogg.

       .vox   A headerless file of  Dialogic/OKI  ADPCM  audio  data  commonly
              comes  with the extension .vox.  This ADPCM data has 12-bit pre-
              cision packed into only 4-bits.

              Note: some early Dialogic hardware does not always reset the AD-
              PCM encoder at the start of each vox file.  This can  result  in
              clipping and/or DC offset problems when it comes to decoding the
              audio.   Whilst little can be done about the clipping, a DC off-
              set can be removed by passing the decoded audio through a  high-
              pass filter, e.g.:

                   sox_ng input.vox output.wav highpass 10


       .w64 (optional)
              Sonic Foundry's 64-bit RIFF/WAV format.

       .wav (also with -t sndfile)
              Microsoft .WAV RIFF files.  This is the native audio file format
              of Windows, and widely used for uncompressed audio.

              Normally  .wav  files  have  all formatting information in their
              headers, and so do not need any format options specified for  an
              input file.  If any are, they will override the file header, and
              you will be warned to this effect.  You had better know what you
              are doing! Output format options will cause a format conversion,
              and the .wav will written appropriately.

              SoX  can read and write linear PCM, floating point, <mu>-law, A-
              law, MS ADPCM, and IMA (or  DVI)  ADPCM  encoded  samples.   WAV
              files  can  also  contain  audio encoded in many other ways (not
              currently supported with SoX) e.g. MP3; in  some  cases  such  a
              file can still be read by SoX by overriding the file type, e.g.

                 play -t mp3 mp3-encoded.wav


              Natively, SoX can only read WAV files with a bit-depth of 8, 16,
              24  or  32; files with other bit-depths can be read by preceding
              them with -t sndfile.

              Big endian versions of RIFF files, called RIFX,  are  also  sup-
              ported.  To write a RIFX file, use the -B option with the output
              file options.

       waveaudio (optional)
              MS-Windows native audio device driver.  Examples:

                   sox_ng infile -t waveaudio
                   sox_ng infile -t waveaudio default
                   sox_ng infile -t waveaudio 1
                   sox_ng infile -t waveaudio "High Definition Audio Device ("

              If  the device name is omitted, -1, or default, then you get the
              `Microsoft Wave Mapper' device.  Wave Mapper means `use the sys-
              tem default audio devices'.   You  can  control  what  `default'
              means via the OS Control Panel.

              If  the device name given is some other number, you get that au-
              dio device by index; so recording with device name 0  would  get
              the first input device (perhaps the microphone), 1 would get the
              second  (perhaps  line  in), etc.  Playback using 0 will get the
              first output device (usually the only audio device).

              If the device name given is something other than a  number,  SoX
              tries  to  match it (maximum 31 characters) against the names of
              the available devices.

              See also play_ng(1), rec_ng(1), and sox_ng(1) -d.

       .wavpcm
              A non-standard, but widely used, variant of .wav.  Some applica-
              tions cannot read a standard WAV  file  header  for  PCM-encoded
              data with sample-size greater than 16-bits or with more than two
              channels,  but can read a non-standard WAV header.  It is likely
              that such applications will eventually be updated to support the
              standard header, but in the mean time, this SoX  format  can  be
              used  to  create  files with the non-standard header that should
              work with these applications.  (Note that SoX will automatically
              detect and read WAV files with the non-standard header.)

              The most common use of this file-type is likely to be along  the
              following lines:

                   sox_ng infile.any -t wavpcm -e signed-integer outfile.wav


       .wv (optional)
              WavPack  lossless audio compression.  Note that, when converting
              .wav to this format and back again, the RIFF header is not  nec-
              essarily preserved losslessly (though the audio is).

       .wve (also with -t sndfile)
              Psion  8-bit A-law.  Used on Psion SIBO PDAs (Series 3 and simi-
              lar).  This format is deprecated in SoX, but will continue to be
              used in libsndfile.

       .xa    Maxis XA files.  These are 16-bit  ADPCM  audio  files  used  by
              Maxis  games.  Writing .xa files is currently not supported, al-
              though adding write support should not be very difficult.

       .xi (optional)
              Fasttracker 2 Extended Instrument format.

SEE ALSO
       sox_ng(1), soxi_ng(1), libsox_ng(3), octave(1), wget(1)

       The SoX web site at https://codeberg.org/sox_ng
       SoX scripting examples at
       https://codeberg.org/sox_ng/sox_ng/src/branch/master/scripts

   References
       [1]    Wikipedia, M3U, http://en.wikipedia.org/wiki/M3U

       [2]    Wikipedia, PLS, http://en.wikipedia.org/wiki/PLS_(file_format)

LICENSE
       Copyright 1998-2013 Chris Bagwell and SoX and SoX Contributors.
       Copyright 1991 Lance Norskog and Sundry Contributors.

AUTHORS
       Chris Bagwell (cbagwell@users.sourceforge.net).  Other authors and con-
       tributors are listed in the ChangeLog file that is distributed with the
       source code.

soxformat_ng                   December 31, 2014                        SoX(7)
